Sports plug cord

RoadsterMNB931

Vehicle type: Roadster
Model: NB8C-200001~(2本セット)
price:
Selling price$70.00

Product information

* Even if it is the same model, it may not be installed depending on the grade and model year. In addition, additional parts may be required for installation. Please be sure to check here for detailed compatibility.

---------------------------

Sports plug cord

Uses a stainless steel core wire with low electrical resistance and excellent noise resistance. By wrapping the core wire around the reinforced Kevlar and winding the three Kevlars in a spiral shape, the generation of the magnetic field that causes noise was prevented. Furthermore, the core wire is coated with a double silicone film. As a result, it achieves both low resistance of about 0.4Ω / m (ignition power is about 20 times that of mass production) and noise countermeasures that are a concern due to the low resistance. >> More details

---------------------------

Ignition power is strengthened with a low resistance triple structure core wire.

Even if it is a gasoline engine car, gasoline cannot even run without burning without electricity. The story is extreme, but the performance of the plug cord that supplies electricity to the spark plug is that important. If so, you may think that it is OK to connect with a wire with low resistance, but that is not a simple story for modern cars. If a copper wire with good transmission efficiency is used to reduce the resistance, electrical noise will be generated and adversely affect the audio and ECU.
Therefore, in general, a resistor is used for the plug cap etc. to reduce the noise, but then the resistance value increases in exchange for the noise reduction, so there is no choice but to compromise somewhere. So what happened to us? First, we adopted a wire rod with low electrical resistance and excellent noise resistance. A low-resistance stainless steel core wire that is strong against magnetism was finely wound around three reinforced Kevlar core materials, and three were spirally wound. At this stage, the generation of the magnetic field, which is the cause of noise, has already been prevented. Next, two types of silicon with different hardness were double-coated, and a silicon material was also used for the boots to create a structure that traps noise.
Furthermore, the connection terminals are also specially designed to achieve low resistance of about 0.4 kΩ / m (ignition power is about 20 times that of mass production) while ensuring noise resistance. At first glance, it looks colorful and fashionable, but the contents are high-performance. The powerful acceleration due to stable ignition performance and the positive effect on fuel efficiency are supported by user reports.

Featured Products

Recently Viewed Products