This time, we will introduce how to install the new product, the Center Console Lid.
This piece features internal cushioning for added comfort and matching stitching that blends in with the interior.
・Vehicle used: Roadster(ND5RE)
For more information on the product, please see below.
[Center console lid product page]
Installation time estimate:0.4h
Difficulty: ★★★☆☆
・Phillips head screwdriver
・17mm wrench (only when using AutoExe manual transmission shift knob)
Remove the shift knob and the shift change panel.
*In the video, we are removing an AutoExe manual transmission shift knob. If you are using a genuine manual transmission shift knob, you will not need a wrench. For automatic transmissions,HerePlease refer to the following.
Open the console lid.
Remove the parking brake panel and disconnect the connector.
*The connector can only be disconnected on vehicles equipped with a drive selection switch or commander switch.
Parking brake boots are stopped2Remove the two hooks.
Tapping screw at the front of the center console(2Books)Use a Phillips screwdriver to remove it, and then remove the center console body.
②Installing the centre console lid
Remove the two screws on the back of the console.
Open the console lid.Remove the two screws and remove the console lid.
Replace the console lid.
What did you think?
It improves comfort when shifting gears, and by matching it with the stitching color of the interior, it creates a unified look as if it had been there from the beginning.
Please consider it.