This time, we'll show you how to install a "fuel cap cover," which adds a touch of elegance to your fuel filler opening.
Vehicle used: MAZDA3
Since it's designed to be installed by simply placing it over a mass-produced fuel cap, it's easy to try.
Product details can be found below.
[Fuel cap cover product page】
Estimated installation time: 0.1 hours
[Installation Instruction Manual Download Page】
Difficulty: ★☆☆☆☆
■Items required for installation
Parts cleaner(Remove dirt and oil from the mounting area.)
• Paper towels(Cloth towels are also acceptable.)
First, the area where the fuel label sticker is attached.(Recess on the top of the fuel cap cover)ofDegrease it.
Do not spray the parts cleaner directly onto the mounting area; instead, spray it onto a paper towel or similar material before use.
Select and attach the fuel label sticker for the appropriate fuel.
② Fuel cap cover installation
Next, degrease the top surface of the fuel cap using the method described above.
Peel off the backing paper and press it firmly onto the original fuel cap to attach it.
② Attach a sticker to warn against misfueling.
Degrease the fuel lid arm using the method described above.
Attach the appropriate sticker to the fuel lid arm to warn against misfueling.
That completes the task!
We recommend coordinating it with the "fuel lid cover" that attaches to the mass-produced fuel lid.
"Fuel lid cover"DIYpageWe have also created this, so please consider it as well.
Posted by T.Takechi