This time,The red and black gradient is striking.Here's how to install the "Sports Floor Mats".
Vehicle used: CX-5 (KF)
Product details and compatible vehicle models can be found below.
[Sports Floor Mat Product Page】
Estimated installation time: 0.1 hours
Difficulty: ★☆☆☆☆
■Items required for installation
Nothing in particular.
■Installation Procedure
First, we'll replace the driver's side mat.
Remove the clips and take off the original floor mats.
After that, replace the sports floor mats with the original ones.
*For vehicles such as the RX-8, where the part fits into a metal fitting under the seat, please refer to the image below.
Operate each pedal and check for any contact or interference.
Next, we'll replace the floor mats in the passenger seat and the rear seats.
Similar to the driver's seat, there are types with clips and types without clips.
There are no clips in the back seat, so you can simply replace it.
[About Maintenance]
Please refrain from using mat washing machines or spin dryers.
This may cause fraying of threads or damage to the edge tape.
If heavily soiled, wash with water only; do not use detergent.
If the stain still doesn't come off, use a diluted neutral detergent that does not contain bleach or fluorescent agents.