This time, we will introduce how to install the "Carbon Paddle Shift Lever", which improves operability and has an attractive carbon texture.
*This product is designed to be installed over the original paddle shifter.
・Vehicle used: CX-8
For more information on the product, please see below.
[Carbon paddle shift lever product page]
Estimated installation time: 0.1 hours
Difficulty: ★☆☆☆☆
・Parts cleaner(Remove dirt and oil from the mounting area.)
・Paper towels(Cloth towels are also acceptable.)
■Product Contents
■ Installation procedure
① Installation on the downshift side (left side when facing the steering wheel)
Paper towel soaked in parts cleaner(Cloth towels)Use this to remove oil and dirt from the front and back of the shift switch.
Peel off the release paper from the cover that says "Down."
Attach it to the front side of the paddle switch.
Next, peel off the peelable cover that says "AutoExe" and stick it over the cover above.
After application, press the top and bottom edges firmly to ensure a firm seal.
② Installation on the upshift side (right side as you face the steering wheel)
Attach it in the same way as for the downshift side.
That's it!
By making the lever larger than the original, it leads to improved operability.
Please consider the "Carbon Paddle Shift Lever", which improves both performance and functionality.