This time, we'll show you how to install the "carbon paddle shift levers," which offer improved operability and an attractive carbon fiber texture.
*This product is designed to be installed by covering the original paddle shifters.
Vehicle used: CX-8
Product details can be found below.
[Carbon Paddle Shift Lever Product Page]
Estimated installation time: 0.1 hours
Difficulty: ★☆☆☆☆
Parts cleaner(Remove dirt and oil from the mounting area.)
• Paper towels(A cloth towel will also work.)
■Product contents
■Installation Procedure
① Installation on the downshift side (left side when facing the steering wheel)
Paper towel soaked in parts cleaner(cloth towel)Next, remove any oil or dirt from the front and back of the shift switch.
Remove the backing paper from the cover that says "Down".
Attach it to the front side of the paddle switch area.
Next, peel off the backing from the cover that says "AutoExe" and stick it on top of the cover mentioned above.
After attaching, firmly press down on the top and bottom edges to ensure a secure bond.
② Shift-up side mounting (right side when facing the steering wheel)
Attach it using the same procedure as for the downshift side.
That completes the task!
By making the lever larger than the original, operability is improved.
Please consider our "carbon paddle shift levers," which offer improved performance and functionality.