This time, we will introduce how to replace the "wiper rubber", which is the rubber part of the "Aero Sports wiper blade", a topic we receive many inquiries about.
For more information on the product, please see below.
Estimated installation time: 0.1 hours
Difficulty: ★☆☆☆☆
・Hand protection such as work gloves
・Parts cleaner
・Items for cleaning windows (cleaner, cloth towels, etc.)
■ Installation procedure
1. Window cleaning
Before replacing the wipers, clean the windows with a cleaner or similar.
②Replace the rubber
*If you perform this procedure while the wiper blades are still attached to the vehicle, the window glass or bonnet may be damaged. Please remove the wiper blades before performing this procedure.
To remove the wiper,Aero Sport Wiper BladePlease refer to the DIY page.
Hold the stopper with the recessed side facing down, grab the bottom of the rubber and pull it out with some force, then remove it.
Do not spray directly onto the product, but spray onto a towel or similar material before use.
Insert the replacement rubber on both sides so that the concave part of the metal rail matches the convex part of the rubber.
Insert the rubber with the metal rail from the side of the blade that does not have a stopper.
Once you have finished threading it through all six insertion points, give it a final push.
Finally, check that the wipers are working properly and the work is complete!
Six months to one year. We recommend replacing it at least once a year.