This time, we will introduce how to attach a "carbon license plate mask", which is useful when taking photos on social media or at offline meetings.
Vehicle used: CX-60 (KH)
Estimated installation time: 0.2 hours
Difficulty: ★☆☆☆☆
■Things required for installation
・Parts cleaner
・Degreasing cloth(Paper and cloth rags)
■ Installation procedure
Use the included suction cup of appropriate size.(Recommended:4Split)Cut to size.
*Please be careful not to cut the adhesive part of the suction cup.
Clean the suction cup surface of the license plate.
Press the suction cup onto the number plate. If the number plate mask is difficult to adhere to, moisten it with water to improve adhesion.
Press it down so that it doesn't cover the convex parts of the license plate as much as possible.
Finally, firmly press the carbon license plate mask in place and the job is done!
Made of high-quality dry carbon material,AutoExeThe silver logo enhances the atmosphere when shooting. Also, the rear one has holes drilled so that the seal does not get in the way.
It is illegal to ride on public roads with the cover attached, so please be sure to remove it after shooting! Also, due to the nature of the carbon material, please store it away from direct sunlight (high temperatures) and below refrigeration when not in use.
It is intended to be worn as a decoration around the license plate.Carbon number frame"or"Carbon Number BoltWe also have products made from the same material, such as ". Please consider them as well.
